Bang & Olufsen BeoVision 11 with Beo4 User Guide - Manual (Page 60)

60
>> Connect and operate an audio system
The television and an audio system is set up
in one room with all speakers connected to
the television:
– Television: VM OPTION 2
– Audio system: Option 0
– SHARE SPEAKERS: YES
Note that the audio system must be selected
once in the CONNECT TO menu and you can
share speakers in the SHARE SPEAKERS
menu,
see page 58 .
The television (with or without additional
speakers) and the audio system (with a
connected set of speakers) is set up in the
same room:
– Television: VM OPTION 1
– Audio system: Option 1
– SHARE SPEAKERS: NO
The audio system is set up in one room, and
the television (with or without additional
speakers) in another:
– Television: VM OPTION 2
– Audio system: Option 2
– SHARE SPEAKERS: NO
For information about Option 4 , see page 61 .
For more information, contact your Bang &
Olufsen retailer.
If you integrate your audio system and
your television, you can choose a speaker
combination appropriate to the current
video or audio programme, and also record
video sound on the audio system.
To listen to sound from a television source
on your audio system speakers without
switching on the screen, press LIST and use
the navigation button up or down to bring
up AV in the Beo4 display, then press TV.
(Beo6: select the zone for your audio system
speakers on Beo6, and then press a source
button, such as TV). Beo6 instruction is
shown to the left and Beo4 instruction to
the right.
To listen to audio sound on the speakers
connected to the television, bring up the
SOURCE LIST and select the desired source
from the audio system listed with a ‘link’
symbol next to it.
Use an audio/video system
Option 0 Option 2 Option 1 Option 1 Option 2 Option 2
Zone ‘A’
TV
LIST
AV
TV