Bang & Olufsen BeoSystem 4 with Beo4 User Guide - Manual (Page 43)

43
Access control
The ACCESS CONTROL menu
allows you to activate a parental
lock to be able to lock specific
channels. You can also set a
maturity rating that determines
which programmes require that
you enter an access code.
When you bring up a channel list,
you can lock and unlock
channels to prevent others from
watching these. If you lock a
channel in the main list, it will be
locked in all the channel groups
in which it is present as well.
When you try to access a locked
channel, you are asked to enter
the access code.
The access control system is not the
same as the pin code system for the
television, but it may be easier for
you if you choose the same code for
both systems.
Also, the access code described here
is not the same as the pin code you
have received with your Smart Card.
For information about Smart Card
pin code, contact your service
provider.
Enable the access code so you can lock
channels and prevent others from
editing channel lists. You can also set a
maturity rating to limit access to certain
programmes exceeding the chosen
rating if rating information is available
from the service provider.
You can always change the access code.
The first time you bring up the ACCESS
CONTROL menu you are asked to select
a new access code.
On some markets, it is not possible to
disable access control for programmes rated
18 years and you must enter the access code
every time you bring up such a programme.
On some markets, it is not possible to select
the access code ‘0000’.
Should you forget your code …
If you forget your access code, bring up the
ACCESS CONTROL menu and press ‘9999’
three times. The access control system is
then disabled and you must enable it again
and enter a new access code. Note that
disabling the access control system is
prohibited by some programme providers.
Set up the access control system
MENU
SETUP
ACCESS CONTROL