Markbass MB Octaver - Manual (Page 3)

03
2. CONTENTS
IntroductIon 3
FunctIon overvIew 4
connectIons 4
tecHnIcAL sPecs 5
BLocK dIAGrAM 5
user settInG cHArt 5
congratulations on your purchase of the Markbass MB octaver.
we are very proud of the high quality standard that we’re able to offer thanks to our 100% Made in Italy production, state-of the-art testing and quality control facilities, and top-
quality components.
this manual will help you get the most out of your MB octaver pedal. If you have any questions after reading it, we invite you to contact us anytime with your comments and
questions at: [email protected].
thank you again, and enjoy your MB octaver!
3. IntroductIon
The MB Octaver gives you a great range of ultra-funky sounds—and it’s dead simple to use.
The pedal features separate level controls for each octave and dry sound so you can add thickness to your sound by mixing in doubles of your playing pitched one and/or two octaves
down. This analog stompbox always sounds musical.
The low notes are clear and perfectly in tune, the sound is super clean, and the tracking is super fast.
Like all our pedals, this unit features “true bypass”: that means that when the Octaver is ‘off’, your signal goes directly from the input jack to the output jack with no degradation of audio
quality.
Start by running a cable from your bass to the MB Octaver input jack, and run another cable from the pedal output to your amp, setting all the pedal’s controls to the counter-clockwise
position. Turn the effect on by stepping on the footswitch, and dial in whatever mix of Dry, Octave 1 and Octave 2 signals you wish by adjusting the level knobs.