Markbass MB Octaver - Manual (Page 4)

04
4. FUNCTION OVERVIEW
OCT 1 (1) – adjusts the volume level of your signal pitched one octave down
OCT 2 (2) - adjusts the volume level of your signal pitched two octaves down
DRY (3) - controls the volume level of your dry sound
ON/OFF SWITCH* (4) – turns the effect on and off; the LED indicator illuminates when the effect is on.
*TRUE BYPASS - When the pedal’s controls are ‘off’, your signal goes directly from the input jack to the output jack with no
degradation of audio quality.
5. CONNECTIONS
1/4” INPUT JACK (5) - (CONNECTS TO YOUR INSTRUMENT) As with any pedal, make sure your amp is off and the volume is
turned down before making connections.
1/4” OUTPUT JACK (6) (CONNECTS TO YOUR AMPLIFIER)
DC IN (7) - External power supply connection (9-12V DC PSU).
STANDARD 9V BATTERY COMPARTMENT (8) - Use a Phillips screwdriver to unscrew the two screws to access the 9V battery
compartment on the bottom side of the pedal.