Elmo QNW4000 - Manual (Page 13)

- 12 -
Mount the camera on the ceiling mounting
bracket using the tapped holes in the top of the
camera and the two fixing bolts attached to the
camera.
Caution:
When the camera is installed
outdoors, since its drip-proof
performance degrades, do not direct
the front side of the camera upward at
any degrees from the level position.
Do not install the camera upside
down.
Fasten the fixing bolts firmly so that
the camera cannot come off and drop
due to looseness.
For mounting on the ceiling mounting bracket (Under eaves and indoor specifications)
Wall mounting bracket
Front side
of the camera
Use the fixing bolts attached to the shade.
(Do not use the fixing bolts attached to the
camera.)
Caution:
Fasten the fixing bolts firmly so that
the camera cannot come off and drop
due to looseness.
For mounting on the ceiling mounting bracket together with the shade (SS-20)
Wall mounting bracket
Shade
(SS-20)
Front side
of the camera