Exabyte EXB-8505 8mm - Manual (Page 106)

Grounding Hole and Ground Tab
The rear panel of the EXB-8205 and EXB-8505 includes a grounding
hole and a ground tab, as shown in Figure 6-2. These can be used to
provide additional chassis grounding if desired. The grounding hole
uses an M3 0.5 6mm self-tapping screw, while the ground tab uses
a
1 ⁄
4
-inch female spade connector.
Note: The power supply returns are connected to the chassis, so you
cannot isolate logic common ground from chassis ground.
Figure 6-2 Chassis ground location on back panel
6-14 EXB-8205 and EXB-8505 510504
(Standard and XL)
6 Functional Specifications