FujiFilm FinePix XP120 - Manual (Page 47)

29 More on Photography
Shooting Mode
6
Press MENU/OK to set the area of motion in the image.
R Repeat steps 5-6 to add another selection area.
R To cancel a selected area, place another selection area on top of the previously
selected area, and press MENU/OK.
Selecting the Area
The size of the selection area can be adjusted by pressing W
(zoom out) or T (zoom in).
• The maximum size of the selection area is 6 × 6 squares.
• If the selection area overlaps a previously selected area
when MENU/OK is pressed, the entire area encompassing
the previously selected area and the newly selected area is
selected.
7
After pressing DISP/BACK, press the selector up or down to
select START, and then press MENU/OK. When processing
is complete, SUCCESSFULLY SAVED is displayed.
Q It may take some time for the camera to process the image.
Wait until processing is complete.
R Select CANCEL to return to the selection area editing
screen.
R
Select END to exit cinemagraph editing and return to
shooting mode.
STORING
CANCEL
IT MAY TAKE A WHILE