Parkside PHD 150 A1 - Manual (Page 10)

10
IE GB
Maintenance
The pressure washer is maintenance free.
Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts.
Storage
• Drain all the water from the pressure
washer.
Disconnect the unit from the water
supply. Press the On/Off switch (10)
to turn on the pressure washer for no
longer than 1 minute until no more
water escapes from the jet gun(1) or
from the attaching parts (17/18/19).
Turn off the unit.
• Protect the pressure washer and its
accessories from frost when they
have not been completely drained of
all water.
• Store the pressure washer and its ac-
cessories in a frost-free room.
Waste Disposal
and Environmental
Protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Electric appliances should not be
disposed of in the domestic gar-
bage.
Hand the tool in at a recycling centre. The
plastics and metal parts can be separated
and recycled. Ask your Service Center
about this.
Guarantee Notes
• This appliance has a 36-month guar-
antee; a shorter 12-month guarantee
applies for replacement according to
statutory regulations.
• Damage due to natural wear and tear,
overload or incorrect use is excluded
from the guarantee. Certain compo-
nents are subject to normal wear and
tear and are excluded from the guar-
antee. Inappropriate use will invalidate
the warranty.
• Furthermore, the prerequisite for guar-
antee services is that the references
indicated in the operating instructions
regarding cleaning and maintenance
have been adhered to.
• Damage, which has been caused
from material or manufacturing faults,
will be made good free of charge, by
replacement delivery or repair.
This requires that the appliance is
returned to our service center undis-
mantled and with proof of purchase
and guarantee.
• Repairs, which are not covered by
the guarantee, can be carried out for
charge by our service center. Our
service center will be glad to provide
you with a cost estimate.
We can only process devices which
have been packaged sufficiently and
which have been dispatched with cor-
rect stamping.
• Devices sent in freight collect - by
bulk freight, express or with other
special freight - are not accepted.
• If you have a justified guarantee
claim, please contact our service
centre by telephone, which will then
advise you on how the claim will be
processed.
• Defective units returned to us will be
disposed of for free.