Areas of application, General description, Ie gb – Parkside PHD 150 A1 User Manual

Page 6

Advertising
background image

6

IE

GB

• Use only original accessories and do

not carry out conversion work on the

equipment.

• Please read the notes in the operating

instructions on the topic of “mainte-

nance and cleaning”. Any measures

above and beyond these, particularly

opening the equipment, are to be car-

ried out by an electrician. In the case

of repairs, always contact our service

centre.

Electrical safety:

Caution: to avoid accidents and

injuries from electric shocks:

• The plug and socket of an extension

cable must be water-tight!

Unsuitable extension cables can

be dangerous as people can be

harmed by an electric shock!

• Protect the electric plug connections

against moisture.

• If there is a risk of flooding, fix the plug

connections in an area that is safe from

flooding.

• Ensure that the mains voltage matches

the specifications on the rating plate.

• Connection to the mains must be carried

out by an experienced electrician and

meet the requirements of IEC 60364-1.

• The electrical installation shall be ac-

cording to national wiring rules.

• The device must only be connected to a

mains socket via a residual-current cir-

cuit breaker (RCD) with a rated leakage

current of not more than 30 mA. Fuse:

at least 6 ampere.

• Before each use, check the equipment,

cable and plug for damage.

• If the power cable for this equipment is

damaged, it must be replaced by the

manufacturer, a customer service agent

of the same or a similarly qualified per-

son in order to prevent hazards.

• Do not pull the plug from the socket by

the cable. Protect the cable from heat,

oil and sharp edges.

• Do not carry or fix the equipment by the

cable.

• Use only extension cables that are pro-

tected from spray water and designed

for outdoor use. Always fully unroll a

cable drum before use. Check the cable

for damage.

• Before any work on the equipment, dur-

ing work breaks and in the case of non-

use, remove the plug from the socket.

• The cross-section of the power supply

cable must not be less than

2 x 1,5 mm².

Areas of Application

Only use the pressure washer in the follow-

ing private home areas:

• To clean machines, vehicles, buildings,

work tools, facades, terraces, gardening

tools, etc. with a high-pressure water

jet.

• Only use with original accessories and

spares.

• cleaning the object according to its

manufacturer’s information.

General Description

The diagram of the most im-

portant functional elements

can be found on the foldout

side.

Advertising