Parkside PHP 500 A1 - Manual (Page 5)

6 GB
Hot glue gun PHP 500 A1
© Introduction
You must familiarise yourself with all sa-
fety instructions and functions of the ma-
chine before starting it up. Further
details can be found in the operating instructions.
Keep these instructions in a safe place.
If you pass
the tool on to anyone else, please ensure that you
also pass on all the documentation.
© Proper use
The device is intended for gluing wood, cardboard,
packaging, PVC, carpet, seals, plastic, leather,
ceramic, glass and textiles with hot-melt adhesive.
The material to be glued must be clean, dry and
free of grease. Any other use or modification to the
tool shall be considered as improper use and could
give rise to considerable dangers. The manufacturer
will not accept liability for loss or damage arising
from improper use. The tool is not intended for com-
mercial use.
© Features
1 Feed channel
2 Check indicator
3 Charger connection
4 Charger with stand
5 Feed clamp
6 Wire stand
7 Drip tray
8 Nozzle
9 Nozzle heat shield
10 Glue gun connection
11 Mains lead
© Included items
1 Hot glue gun PHKP 500 SE
1 Charger with stand
1 Mains lead
1 Wire stand
1 Replacement nozzle (short)
1 Interchangeable nozzle (long)
6 Glue sticks
1 Carry case
1 Operating instructions
Introduction
The following pictograms are used in these operating instructions / on the device:
Read instruction manual! For indoor use only!
V~
Volt (AC)
Risk of loss of life by electric shock from
damaged mains lead or mains plug!
W
Watts (Effective power)
Danger of burns from nozzle or glue
(up to 200°C)!
Safety class II Cordless working
Observe caution and safety notes! Wear protective gloves.
Keep children away from electrical
devices! Dispose packaging and appliance in
an environmentally-friendly way!