Parkside PWS 230 A1 - Manual (Page 34)

30 PWS 230 A1
GB
ANGLE GRINDER PWS 230 A1
Introduction
We congratulate you on the purchase of
your new device. You have chosen a high
quality product. The instructions for use
are part of the product. They contain important
information concerning safety, use and disposal.
Before using the product, please familiarise
yourself with all of the safety information and
instructions for use. Only use the unit as described
and for the specifi ed applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.
Intended use
The appliance is intended for cutting, rough cutting
and brushing metal work materials without the use
of water. Any other usage of or modifi cation to the
appliance is deemed to be improper usage and
carries the risk of serious personal injury. The manu-
facturer accepts no responsibility for damage(s)
resulting from improper usage.
The appliance is not meant for commercial use.
NOTE
► Slots in load-bearing walls are subject to
the standard DIN 1053 part 1 or country-
specifi c regulations. These provisions must be
strictly adhered to. Please seek the advice of
the responsible structural engineer, architect,
or the supervising construction management.
Features
Hand grip (rotatable)
ON/OFF switch
Safety lock-out
Unlocking button
Carbon brushes cover
Auxiliary handle
Disc guard cover
Clamping lever
Coded projection
Adjuster screw
Spindle lock button
Threaded hole (3 x) for auxiliary handle
Clamping nut (see Fig. C)
Mounting spindle (see Fig. C)
Mounting fl ange (see Fig. C)
Coded groove (see Fig. C)
Spanner
Package contents
1 angle grinder PWS 230 A1
1 auxiliary handle
1 disc guard cover
1 spanner
1 operating instructions
Technical data
Rated voltage: 230–240 V~ 50 Hz
Rated power
consumption:
2000 W
Rated speed: n 6500 min -1
Grinding disc: Ø 230 mm
Spindle thread: M14
Protection class: II /
Noise and vibration data:
Noise measurement value determined in accordance
with EN 60745 The A-rated noise level of the
power tool is typically:
Sound pressure level: L
PA
= 96.8 dB (A)
Uncertainty: K = 3 dB (A)
Sound power level: L
WA
= 107.8 dB (A)
Uncertainty: K = 3 dB (A)
Wear ear protection!
Vibration values:
Angle grinding
(main handle):
a
h, AG
= 10.075 m/s 2
Angle grinding
(additional handle): a
h, AG
= 6.551 m/s 2
Uncertainty: K = 1.5 m/s 2
IB_103262_PWS230A1_LB2.indb 30 23.10.14 08:55