Troubleshooting, Disposal and recycling – Parkside PKS 1500 A1 User Manual

Page 47

Advertising
background image

42

GB/MT

Troubleshooting

Fault

Possible cause

Remedy

Motor does not work

Motor, cable or plug defective, fuses burnt

Arrange for inspection of the machine by a

specialist. Never repair the motor yourself. Danger!

Check fuses and replace as necessary

The motor starts up

slowly and does not

reach operating speed.

Voltage too low, coils damaged, capacitor

burnt

Contact the utility provider to check the voltage.

Arrange for inspection of the motor by a specialist.

Arrange for replacement of the capacitor by a

specialist

Motor makes excessive

noise

Coils damaged, motor defective

Arrange for inspection of the motor by a specialist

The motor does not

reach its full power.

Circuits in the network are overloaded (lamps,

other motors, etc.)

Do not use any other equipment or motors on the

same circuit

Motor overheats easily. Overloading of the motor, insufficient cooling

of the motor

Avoid overloading the motor while cutting, remove

dust from the motor in order to ensure optimal

cooling of the motor

Reduced cutting power

when sawing

Saw blade too small (ground too much)

Readjust end stop of the saw unit

Saw cut is rough or

wavy

Saw blade dull, tooth shape not appropriate for

the material thickness

Resharpen saw blade and/or use suitable saw blade

Workpiece pulls away

and/or splinters

Excessive cutting pressure and/or saw blade

not suitable for use

Insert suitable saw blade

DECOMMISSIONING OF THE MACHINE

After the machine is decommissioned it can be disposed
of with normal industrial waste.

Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. Never place
batteries in your household refuse, in fire or in water.
Batteries should be collected, recycled or disposed of
by environment-friendly means. The equipment and
its accessories are made of various types of material,
such as metal and plastic. Defective components must
be disposed of as special waste. Ask your dealer or
your local council.

Advertising