Parkside PLBS 30 B2 - Manual (Page 7)

07
d h
CAUTION RISK OF FIRE! To reduce the risk of fire,
place the soldering iron only in to its holder or on to a non-
flammable surface when it is not in use. Avoid contact between
the hot parts of the soldering iron and the plastic parts of the
soldering iron stand.
d e
CAUTION DANGER OF BURNS! Do not touch the hot
soldering iron tip, the melted solder or hot components while
soldering, risk of burns!
The soldering stand can become hot when the soldering iron is
placed in it. Risk of burns!
Use the device only in well
ventilated rooms. Toxic fumes can be produced when soldering,
which can lead to damage to the mucous membranes and/or
chronic respiratory illness. Additionally, we recommend that you
wear eye protection, respiratory protection, protective gloves and
protective clothing.
Solder can contain lead. Do not eat, drink or
smoke while soldering. Always wash your hands thoroughly after
finishing work.
Be sure to disconnect the machine from the mains after finishing
work!
Allow the soldering iron to air-cool completely after use before you put
it away. Rest the device on the stand provided or on a non-flammable
surface during breaks or when cooling after finishing work. Do
not leave the soldering iron unsupervised until it has cooled down
completely. Do not cool the soldering iron by rinsing it with water!