Integrated pump control scada rtu – Emerson Process Management Control Wave SCADA RTU User Manual

Page 3

Advertising
background image

Product Data Document

420DS-12A

October 1, 2007 - Page 3

Integrated Pump Control

SCADA RTU

Website: www.EmersonProcess.com/Remote

Remote Automation Solutions

SCADA Packages

The Bristol ControlWave Micro and ControlWave

ExpressPAC integrated SCADA packages, from

Emerson, are designed and built for out-of-the-box

installation and startup. The assemblies are fully

integrated units that combine the PLC/RTU with

a variety of options commonly required in SCADA

applications. These include a NEMA 4X rated en-

closure, power supply and battery backup options,

termination options, display and operator input op-

tions, and wireless communication options.

Historical Archive

Historical data is stored in three archive files in the

ControlWave PLC/RTU flash memory. This ensures

maximum data integrity even in the event of a

SCADA communication network failure. The his-

torical data archives may be collected periodically

on a scheduled or demand basis by the OpenBSI

Harvester utility. This technique also minimizes

communication bandwidth requirements significantly

benefiting radio and cellular network architectures.

Daily Archive:
Stores 35 days of time-stamped minimums, maxi-

mums, averages and totals

Hourly Archive:
Stores hourly time-stamped minimums, maximums,

averages and totals

Trend Archive:
The Trend Archive stores instantaneous values at a

fixed period from one minute to sixty minutes.

Setup and Configuration

As mentioned earlier, the

ControlWave pump control

SCADA application is pre-programmed. The unit

only needs site specific configuration through the

easy-to-use set of web pages supplied with the ap-

plication software. These configuration web pages

are accessible through the OpenBSI TechView

utility.

ControlWave MIcro

PLC/RTU SCADA Package

The ControlWave SCADA packages with the pre-

programmed pump controller application are ideal

for integrating remote site measurement and control

into the SCADA system.

Station Control Strategies:

Level control
Pressure control
Time control
Pump lead/lag and pump alteration
Pump interlock and permissive conditions
Manual and PID VFD Control

TechView allows easy connection to any

ControlWave PLC/RTU through serial or Ethernet

ports. The utility is essentially a web page browser

that really simplifies menu navigation and PLC/RTU

configuration.

Advertising