Efficient Networks SpeedStream 5667 - Manual (Page 12)

SpeedStream Dual USB/Ethernet Router User’s Guide
Model 5667
12
Wall-Mount Filter
For a wall-mounted phone, install a wall mount
filter:
1. Remove the phone.
2. Connect the wall mount filter to the wall
plate.
3. Reconnect the phone.
Two-to-One Adapter
If your DSL router and another device will
share the same phone jack, install a two-to-one
adapter:
1. Plug the two-to-one adapter into the phone
jack.
2. Plug a line filter into one of the sockets of
the two-to-one adapter. The other socket
will be used to connect the DSL cable.
3. Plug the telephone (or other device) cord
into the line filter.
Connecting the Cables
The SpeedStream router may be connected to either an existing USB port or an Ethernet port. Both
connection methods are detailed in this section.
If you choose to attach the SpeedStream modem via the Ethernet Interface, you will need to install an
Ethernet adapter if your computer does not already have one installed. Refer to your Ethernet adapter
manufacturer’s documentation for complete installation instructions.