Efficient Networks SpeedStream 5667 - Manual (Page 8)

SpeedStream Dual USB/Ethernet Router User’s Guide
Model 5667
8
Chapter 2
Installing the Router
Before installing the SpeedStream ® Dual USB/Ethernet Router with SecureRoute TM , verify that you have
all the items listed under “Package Contents.” If any items are missing or damaged, contact your local
Siemens distributor. After installing the router, refer to the subsequent chapters in this document for
additional instructions on configuring network and router settings.
Package Contents
By default, we have chosen not to ship the serial cable and the cross-over cable.
SpeedStream 5667 ADSL Router
(Optional, depending upon service provider) Line filters; two-to-one
adapter
Power supply for a 220v or 110v electrical outlet
Telephone cable—This cable is the DSL cable that will be used for your
Internet connection. The end connectors are 4-pin connectors and are
smaller than those of the 8-pin 10BASE-T Ethernet cables.
Ethernet 10BASE-T straight-through cable— This cable is used to
connect your modem directly to an Ethernet port on your PC.
Ethernet 10BASE-T crossover cable—This cable, labeled as “x-over,”
connects to the Ethernet ports on your PC and router and is used for an
Ethernet connection.
Serial cable — This cable is used to connect to the serial ports on your PC
and router.
USB cable—This cable is used if connecting to the router via a USB
connection.