Electrolux 12710 VIT - Manual (Page 16)

Display
The display shows the following information:
• Duration of the selected programme (in hours and minutes), calcu-
lated automatically on the basis of the maximum recommended load for
each type of fabric.
• Selected drying time (max. 130 minutes for cotton and easy cares).
After the programme has started, the time remaining is updated every
minute.
• When the programme has finished, a blinking lit zero is displayed.
• Delayed start, (23 hours max.) programmed using the special button.
The countdown is updated every hour and by 30 minutes the last 2
hours.
• Alarm code indicating a fault in the machine operation (see page 38).
Programme progress display
By selecting the wash programme, the pilot lights corre-
sponding to the various phases making up the programme
come on.
After the machine has started, only the running phase pilot
light stays on. When the programme has finished, the END
pilot light comes on.
Cancelling a programme
To cancel a programme which is running, turn the programme selector
dial to the RESET position.
Warning! After a programme which ends with water in the drum
(RINSE HOLD option), turn the selector dial first to RESET and then to
the DRAIN or SPIN programme.
16
Description of the appliance
RINSE
CLEAN
FILTER
PREWASH
WASH
DRY
END
DRAIN
SPIN
132984531.qxd 28/11/2005 16.32 Pagina 16