Electrolux 12710 VIT - Manual (Page 48)

Instructions for installation and electrical con-
nection
Safety instructions for the installer
• This appliance is heavy, care should be taken when moving it.
• When unpacking the appliance, check that it is not damaged. If in doubt,
do not use it and contact the retailer.
• All internal packing must be removed before using the appliance. Serious
damage may be caused to the machine or adjacent furniture if the protec-
tive transit devices are not removed or are not completely removed. Refer
to the relevant paragraph.
• Any electrical work required to install this appliance must be carried out by
a qualified electrician or competent person.
• Any plumbing work required to install this appliance must be carried out
by a qualified plumber or competent person.
• After having installed the machine, check that it is not standing on its elec-
trical supply cable.
• If the appliance is placed on a carpeted floor, ensure that air can circulate
freely between the adjustable feet and the floor.
• The installation should comply with local water authority and building reg-
ulations requirements.
• Should the appliance power supply cable need to be replaced, this should
be carried out by our Service Force Centre.
48
132984531.qxd 28/11/2005 16.32 Pagina 48