Event electronic Biamplified Direct Field Monitor System - Manual (Page 5)

The Line 2 input connector is hardwired in parallel with the Line 1 input
connector, so either may be used as an input or as a pass-through
connection. Input specifications apply equally to both inputs.
Figure 2. Tuned Reference rear panel connections and controls.
Unbalanced RCA Line Input This jack accepts a male RCA connector,
wired for unbalanced operation. This jack is hardwired in parallel with the
balanced line inputs. However, due to it being an unbalanced input, we do
not recommended using it in combination with either of the balanced
inputs, as this will unbalance those inputs, possibly causing degradation
of the audio signal.
TUNED REFERENCE USER GUIDE 5
INPUT CONNECTIONS
BAL BAL UNBAL
SIGNAL XLR 1/4” 1/4”– RCA
+ PIN 2 TIP TIP
– PIN 3 RING
SHIELD PIN 1 SLEEVE SLEEVE
POWER REQUIREMENTS
120V~ 60HZ 0.8A 100W
220/240V~ 50/60HZ 0.5A 100W
100V~ 50/60HZ 1.0A 100W
INPUT
SENSITIVITY
-5dB
-20dB MAX
BALANCED
INPUTS
UNBAL
INPUT