Event electronic Biamplified Direct Field Monitor System - Manual (Page 7)

Contacting Customer Service
If you experience any trouble with your Tuned Reference monitors, please
call the Event Electronics Customer Service department at 805-566-7777,
ext. 5. Before calling, however, we ask that you please consult the Technical
Support section of our Web site, www.event1.com.
If you believe your Tuned Reference monitor is in need of repair, please
contact the Event Electronics Customer Ser vice department to request
a Return Authorization Number (RA#). We can accept for ser vicing only
those units that are accompanied by an RA#. Units shipped without an
RA# number will be refused.
Tuned Reference Specifications
Low Frequency Driver
TR5: 5.25"; TR6: 6.5"; TR8/8XL: 8" magnetically shielded mineral-filled polypropylene cone
with high temperature voice coil and damped rubber surround.
High Frequency Driver
TR5: 25mm magnetically shielded natural soft dome neodymium with ferrofluid-cooled voice coil.
TR6/TR8/8XL: 1" magnetically shielded natural silk dome with ferrofluid-cooled voice coil.
Frequency Response
TR5: 45Hz – 39kHz; 53Hz – 19kHz,
±
3dB, Ref 500Hz
TR6: 45Hz – 20kHz,
±
3dB, Ref 500Hz
TR8/8XL: 35Hz – 20kHz,
±
3dB, Ref 500Hz
Crossover
TR5: 2.6kHz active second-order asymmetrical
TR6: 2.6kHz active fourth-order asymmetrical
TR8/8XL: 2.6kHz active fourth-order asymmetrical
Sound Pressure Level (Output)
TR5: >105dB; TR6: >106dB; TR8: >108dB; TR8XL: >111dB
Noise
All Models: >100dB below full output, 20kHz bandwidth, unweighted
Input Connectors
XLR and 1/4" connectors; accept balanced or unbalanced sources
RCA connector; accepts unbalanced sources
Polarity
Positive signal at + input produces outward low frequency cone displacement
TUNED REFERENCE USER GUIDE 7