Curtis SP399 - Manual (Page 11)

2.The battery charging indicator flashes while charging and it stops flashing
when the unit is fully charged. Unplug the AC cord from the AC wall outlet once
the battery is fully charged.
*A fully charged battery provides approximately three hours of use at maximum
volume. The rate of battery discharge Varies with the volume setting. You can
extend the battery playback time by reducing the volume.
Pairing your device using Bluetooth®
Pairing your device to this speaker for the first time
You need to follow the pairing instructions bellow to link the speaker with your
1.With the speaker turned on. Press the “M” button repeatedly, until “bLUE” is
shown on the display. The “bLUE” symbol flashes to show that the speaker is
ready to pair (link) with your Bluetooth® device.
2.Activate Bluetooth® on the compatible device, and set it to search for
compatible devices.
3.Select the speaker name:”SP399” from the list of found devices.
Tips: Only one playback unit can be connected to the peaker.
1.If your device asks for a passkey (depending on the device manufacturers,
model, and software version), then enter digits ”SP399” and press OK.
If pairing has been carried out success fully. a beep sound is heard, meanwhile,
the “bLUE” symbol stops flashing.
Reconnecting to a device that has previously been paired to this speaker
1.After turning on the speaker, the speaker will search for the last paired
9