Curtis SP399 - Manual (Page 13)

Speaker Phone
Using this speaker as a speaker phone
1.Link your cell phone to the speaker via Bluetooth® as described before.
2.When receiving an incoming call on your cell phone. Tap button on the
speaker to switch the incoming call form cell phone to the speaker. A short
beep sound will be heard confirming the call was answered. Complete your call
using the built-in microphone and speaker.
3.Adjust the volume control of your cell phone to obtain the desired sound level.
4.To end the call, just tap the button again, a short beep sound will be
heard and the call will end. If you were playing music from your cell phone to
the speaker before answering the call, the music will automatically resume
playing when hang up.
Charging Mobile Devices
The SP399 can be used to charge mobile devices such as smart phones, tables
and other USB powered devices.
TO CHARGE
1.Plug the USB power cable of your device into the USB port on SP399(12)
2.Plug the other end of the cable into your mobile device, and charging will
commence.
● You can continue to listen the speaker while charging.
● The speaker will charge until completely out of power.
● The output for charging is 5V/1A.
● Battery capacity: 1800mAH
11