RCA WM60A User Manual
Page 8
8
Power Supply
This product is designed to operate on an Alternating Current (AC) power supply. Plug the AC
Power Cord into a standard household 120V electrical outlet.
Battery Safety Precautions:
• Keep batteries away from children and pets.
• Do not use rechargeable batteries with this product.
• Insert the battery observing the proper polarity (+/−). Failure to properly align the battery polarity can
cause personal injury and/or property damage.
• Remove spent or discharged batteries from the product. Remove the battery when the product
will not be used for extended periods of time to prevent damage due to rusted or corroded
batteries.
• Never throw batteries into a fire. Do not expose batteries to fire or other heat sources.
• Battery Disposal: Spent or discharged batteries must be properly disposed of and recycled in
compliance with all applicable laws. For detailed information, contact your local county solid
waste authority.
• Follow the battery manufacturer’s safety, usage, and disposal instructions.
Battery Backup:
A 9-volt battery (not included) may be installed as a backup option to maintain the time if electrical
power fails. In the event of a power outage, the time will not appear on the clock LED display;
however, the clock will continue to operate and the actual time will be maintained. The clock LED
display and other functions will resume once electrical power is restored. If used, the 9-volt battery
should be replaced as needed. Remove the battery if the clock is not used or stored for long periods
of time.
To set the clock time:
1.
Plug the product into a standard 120V AC electrical outlet.
2.
To set the current clock hour(s):
a.
Press and hold the TIME Button.
b.
Press the HOUR Button until the desired hour(s) is reached.
A red dot appears in the clock LED display next to PM to indicate the PM time.
c.
Release the TIME Button.
3.
To set the current clock minute(s):
a.
Press and hold the TIME Button.
b.
Press the MIN Button until the desired minutes(s) is reached.
c.
Release the TIME Button.
To set and use the alarm function:
The alarm may be set to wake up to an alarm buzzer or the radio.
All alarm functions are deactivated when the ON/OFF/AUTO Switch is set to the ON position, as
the radio is in use.
1.
Ensure the current time is set.
2.
Set the alarm time:
a.
Press and hold the AL. SET Button.