RCA WM60A User Manual
Page 9
9
b.
Press the HOUR Button until the desired hour(s) is reached.
c.
Press the MIN Button until the desired minute(s) is reached.
d.
Release the AL. SET Button.
3.
Slide the ON/OFF/AUTO Switch to the AUTO position.
A red dot appears next to AL in the clock LED display.
4.
Select the alarm sound (to awake by):
• To wake up to the alarm buzzer:
a.
Slide the FUNCTION Selector to BUZZ position.
b.
Rotate the VOLUME Knob to the desire sound level.
c.
The alarm buzzer will sound at the set alarm time.
• To wake up to the radio:
a.
Slide the FUNCTION Selector to RADIO position.
b.
Rotate the VOLUME Knob to the desired volume level.
c.
Tune the radio to the desired bandwidth (AM or FM) and broadcasting station.
d.
The radio will sound at the set alarm time.
5.
To silence the alarm, press the AL. OFF Button.
6.
The alarm remains set to sound again the next day at the set alarm time.
7.
To deactivate the alarm, slide the ON/OFF/AUTO Switch to the OFF position.
The red dot in the clock LED display (next to AL) disappears.
Note: When the FUNCTION Selector slide to iPod position, the alarm will not be on.
To use the snooze function:
The snooze function can be used to silence the alarm for nine minutes once activated. When the
buzzer or radio alarm sounds, lightly touch the SNOOZE Button.
NOTE: The SNOOZE Button operates the snooze function only when the ON/OFF/AUTO Switch
is set to the AUTO position.
To use the sleep function:
The sleep function can be used to play and turn off the radio after a set amount of time (up to 1 hour
59 minutes) has elapsed.
1.
Slide the ON/OFF/AUTO Switch to the OFF position.
NOTE: If using the alarm function simultaneously with the sleep function, set the
ON/OFF/AUTO Switch is set to the AUTO position to ensure alarm activation. The alarm
function will be set to wake up by the radio. The sleep function cannot be used with the buzzer
alarm.
2.
Press the SLEEP Button.
The clock LED display shows “0:59”.
3.
To adjust the sleep function time: