Curtis SDPF787 - Manual (Page 3)

Important Safety Precautions
1. Please read the operation manual.
2. Please keep the operation manual.
3. Please pay attention to cautions.
4. Please follow the operation manual.
5. Please don’t use this device near water source. Warning: to reduce the risk of fire or electric
shock, please don't expose the device into rain or moisture environment.
6. Please use soft dry cloth to clean any dirt on device surface. If the dirt still cannot be cleared,
please refer to Matters Needing Attention to gain further instructions.
7. Please don’t install the device near instrument which can produce heat, such as radiator, heat
recorder, stove and so on.
8. Protect the plug, socket and its other parts connecting with device of power line from being
treaded by persons or squeezed by other things. Make sure to install power socket near the
device, for the convenience of use.
9. Please plug out the power plug in lightning weather or when it is left unused for long time.
10. Only professional can carry out its repair work. When the device is damaged, such as the power
line or plug damaged, splashed with fluid or other things falling onto device, or the device
cannot work normally due to be caught in the rain, be affected with damp or fall to ground, it is
necessary to maintain device.
Matters Needing Attention
1. This device is fragile product. Please place it on flat surface at the time of using. It cannot bear
the crash caused by falling down.
2. This device is not moisture proof or moisture resistant. It will be easily damaged if it is affected
by damp or splashed with fluid.
3. The device screen (LCD panel) is made of glass. Therefore, it is easily damaged when being
affected by abnormal outside force or injured by sharp instrument.
4. This device is LCD display. Please don't press the screen at will. Otherwise, the screen may be
damaged.
5. This device support hot plug operation. However, it is necessary to cut off power supply before
plugging in/out the memory card as far as possible to prevent your memory card or device from
being damaged due to static electricity or other reasons.
6. To ensure the device display quality, our company strongly recommends you to use original
power adaptor.
7. It is necessary to keep screen clean. Cut off power supply and then clean it with wet soft cloth.
Please don’t clean the screen with alcohol, petrol or other chemical regents. Otherwise, the
device may be damaged.
8. To ensure the normal operation of device, please don’t store or use device in too cold or too hot
place or place the displayer in moisture place or place with long-term direct sunshine. Besides,
don't use the device in severe environment (e.g. strong shock), in order to avoid accident.
9. During operation, the device may be slightly heated. It is normal and doesn’t indicate the device
is faulty.
3