Ò³ãæ 5 – Curtis SDVD8747 User Manual
Page 5
Advertising
7
6
In Car Installation
ON
OFF
Connecting to
the monitor
The unit can also be connected to the external LCD monitor.
Connect the unit to power by cigarette lighter adapter.
Then connect the unit DC OUT jack to DC IN 9-12V Jack of the LCD Monitor by a DC/AV
cable. Also use this DC/AV cable to connect the AV OUT jack of the unit to AV IN
jack of the Monitor.
Please refer to the illustration below.
Note: You're advised to supply both units the power by the cigarette lighter adapter
only. The AC/DC adapter is used to supply power of one unit only and as the charger
to charge the main unit if it's with built-in battery.
DC OUT
AV OUT
SD
Advertising