Auriol Z31092 - Manual (Page 40)

40 GB/MT
Operation
To check the setting / rising time for other
location & date, press and hold down the
SUN / MOON button
31 for about 3 sec-
onds to access the setting / rising time of the
sun or moon quick control mode. The loca-
tion
8 flashes.
Set the country, city, year, month and the
day for which you wish the information to be
displayed by pressing the SUN / MOON
button
31 or the / button 11 or the
/ 12 / 24 button 14 .
Press the SUN / MOON button 31 to con-
firm your settings.
Note: The sun and moon setting or rising
time flashes while the values are being
calculated.
Note: If the next moon rising or setting is
on the following day, the display shows
MOONRISE+1 or MOONSET+1.
Moon phases
The following moon phases are shown by the
moon phase symbol
6 :
New moon Waxing half-
moon Half-moon Waxing full
moon
Full moon Waning full
moon Half-moon Waning half-
moon
Preparing to use the weather
forecasting function
Note: Please take the weather forecast from
your local weather forecasting service into account
as well as the forecast from your weather station.
If there are discrepancies between the information
from your device and from the local weather
forecasting service, please take the advice of the
latter as authoritative.
Press the HISTORY / WEATHER button 27
for about 3 seconds. The weather symbol 1
flashes.
Set the current weather by pressing
the “+“ / °C / °F button
28 or the
“–“ / MAX / MIN button 29 .
You can choose between the following
weather symbols:
= sunny
= light clouds
= cloudy
= cloudburst /
storm
= rainy
Press the HISTORY / WEATHER button 27 to
confirm your settings.
Note: Ensure that you have set the current
weather correctly, otherwise the weather
forecast will not be correctly displayed.
The weather station starts with the weather
forecast approximately 6 hours after you
enter the current weather.
The weather station can display the barometric
pressure trend
25 . You may see the following
displays:
= the barometric pressure will rise.
= the barometric pressure will remain
constant.
= the barometric pressure will fall.
Reading the barometric
pressure
Press the Relative / absolute barometric pres-
sure button
30 to switch between the relative
and absolute barometric pressure display.
Note: The display shows “Abs” if you have
selected absolute pressure. The display shows
“Rel” if you have selected relative pressure.
Note: The absolute barometric pressure is
measured by the weather station.
Set the relative barometric pressure to the
barometric pressure relative to that at sea
level. Ask your local weather forecast service
for the barometric pressure at sea level.
Press and hold down the Relative / absolute
barometric pressure button
30 for about
3 seconds.
Set the current barometric pressure by press-
ing the “+“ / °C / °F button
28 or the
“–“ / MAX / MIN button 29 .
Press the Relative / absolute barometric
pressure button
30 to confirm your settings.
Reading the barometric
pressure for the last 12 hours
Press the HISTORY / WEATHER button 27
to read the barometric pressure values for
the last 12 hours.