Auriol Z29962E_F - Manual (Page 16)

16 GB
j Place two 1.5 V batteries (AA) (included) in
the battery compartment 21 .
note: take care that the polarity is correct. This
is indicated inside the battery compartment
21
(see Fig. B).
j Close the battery compartment cover.
As soon as the batteries have been inserted, the LCD
indicates the indoor temperature
5 and the humidity
3 . The weather station starts to receive the signal
from the external sensor. When it has successfully
received the external sensor signal, the outdoor
temperature
17 appears on the LCD after around
1 minute.
note: do not alter the position of the weather station
when it is picking up the signal, as this can interfere
with reception.
The weather station starts to pick up the radio signal
after it has successfully received the external sensor
signal. This process can take up to 7 minutes and is
indicated on the LCD by the flashing icon
13 .
Once the DCF radio signal has been picked up
successfully, the icon
13 is displayed constantly
on the LCD.