Auriol Z29962E_F - Manual (Page 19)

19 GB
j Press the ALARM button 9 briefly. The hours
start to flash.
j Press the ADJUST button 12 to set the required
number.
j Press the ALARM button 9 to confirm your
entry. The minutes start to flash.
j Press the ADJUST button 12 to set the required
number.
j Press the ALARM button, 9 to confirm your
entry.
j The LCD returns to the standard display (Time 10 ).
Q 
Switching the alarm on / off
j Press and hold the ALARM button 9 for approx.
3 seconds. The set alarm time appears on the LCD.
j Press the ADJUST button 12 to switch the alarm
on or off.
note: when the alarm is switched on, is
displayed above
aL.
note: if no button is pressed within a space of
approx. 30 seconds, the LCD automatically
returns to the standard display.
j The alarm rings for approx. 2 minutes as soon as
the set alarm time is reached. The alarm signal
is switched off automatically after 2 minutes.
Press one of the buttons, MEMORY 11 , ADJUST