Using your eos system – Eos Wireless Digital Wireless Multi-Room Audio System User Manual

Page 18

Advertising
background image

18

Using Your Eos System

Using Your Remote Control:
The Remote controls the basic functions of your iPod while it is docked in the Eos Base Station.

For best results, aim the Remote Control towards the lower right corner of the grill area.

wireless

TM

Select Forward/FF Button

In play mode, press to move up a

track or press and hold to fast forward.

Play/Pause Button

Plays track. In play mode, press to pause.

Volume Up/Down

In play mode press to adjust

volume of Base Station speakers.

Select Down/Rew Button

In play mode, press to move down a

track or press and hold to rewind.

Speaker Button

Mutes the Base Station speakers.

To install or replace the battery for the remote control:
The Remote Control battery is already installed at the factory. If the Remote Control stops

operating or its range seems reduced, replace the battery with a new one. The battery door is

located on the back end of the unit.

1. Squeeze the notched tab A while pulling the battery door latch B out to remove

the battery holder.

2. Insert a “CR2032” 3V lithium battery. Make sure the polarity (+ and – side of the bat-

tery) is correct.

3. Replace the battery holder back in the Remote Control. Please discard the used

batteries properly.

Battery

door

latch

B

A

Advertising