Eos Wireless Digital Wireless Multi-Room Audio System - Manual (Page 21)

21
Using Your Eos System
Reattaching the Power Supply to the Wireless Speaker:
1. Coil the cord around your hand.
2. Place the coil of cord in the bottom of the cavity.
3. Press lower edge of swivel plate to rotate forward
4. Insert the power supply into the cavity leaning forward.
5. Press down on the top of the power supply.
6. Rotate the power supply back to a vertical position (making sure to lock the tab at
the top of the speaker cabinet with the groove at the top of the power supply.)
CLICK!