Eiki LC-XB33N - Manual (Page 18)

18
Installation
Connecting to a Computer
Cables used for connection
• VGA Cable (Mini D-sub 15 pin) *
• DVI-VGA Cable
• DVI Cable
• USB Cable
• Audio Cables
(*One cable is supplied; other cables are not supplied with the projector.)
Unplug the power cords of both the
projector and external equipment
from the AC outlet before connecting
cables.
External Audio Equipment
DVI
cable
Audio cable
(stereo)
Audio cable
(stereo)
Monitor Output
or
Monitor Input
Audio Output
COMPUTER/
COMPONENT
AUDIO IN
AUDIO OUT
(stereo)
Audio Input
Monitor Output
COMPUTER
IN 1/ DVI-I
VGA
cable
This terminal is switchable. Set up
the terminal as Computer2 input or
COMPONENT IN or Monitor output.
(See Page 50.)
COMPUTER IN 2
/COMPONENT IN
/MONITOR OUT
DVI
-VGA
cable USB cable
Installation
Notes:
• Input sound to the COMPUTER/COMPONENT AUDIO IN
terminal when using the COMPUTER IN 1/DVI-I and the
COMPUTER IN 2/ COMPONENT IN /MONITOR OUT terminal
as input.
• When the AUDIO OUT is plugged-in, the projector's built-in
speaker is not available.
• When the cable is of the longer variety, it is advisable to use the
COMPUTER IN 1 / DVI-I and not the COMPUTER IN 2 /
COMPONENT IN / MONITOR OUT.
• USB cable connection is needed when operating the computer
with the remote control or using the PAGE ▲▼ buttons on the
remote control.