Eiki LC-XB33N - Manual (Page 20)

0
Installation
Connecting to Component Video Equipment
Cables used for connection
• Audio Cables
• Scart-VGA Cable
• Component Cable
• Component-VGA Cable
(Cabels are not supplied with this projector.)

Notes:
• When the AUDIO OUT is plugged-in, the projector's
built-in speaker is not available.
• See page 72 for ordering optional cables.
• RGB Scart signal cannot be output from the MONITOR
OUT terminal.
Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting cables.
External Audio Equipment
COMPUTER/ COMPONENT
AUDIO IN
Audio cable
(stereo)
Audio cable
(stereo)
Audio Input
Component Video Output
(Y, Pb/Cb, Pr/Cr)
RGB Scart 21-
pin Output
Audio Output
Scart-VGA
cable Component-
VGA cable
AUDIO OUT
(stereo)
Component
cable
COMPUTER IN 2/ COMPONENT
IN / MONITOR OUT
This terminal is switchable. Set up
the terminal as Computer2 input or
COMPONENT IN or Monitor output.
(See Page 50.)
Basic Operation