Sybase XTNDAccessTM - Manual (Page 10)

10
Infrared Setup for Windows XP
For Windows XP, no additional drivers or applications are required to use the
XTNDAccess IrDA PC Adapter. However, the following setup must be
performed in order for the Adapter to work with your computer.
1. Verify the serial connector of the Adapter is attached to a serial port of
the computer.
2. From the Start menu, select Control Panel, and then double-click the
Add Hardware icon.
3. From the Add Hardware wizard, click Next.
4. Select Yes, I have already connected the hardware and click Next.
5. From the list of installed hardware, select Add a new hardware device
and click Next.
6. Select Install the hardware that I manually select from a list
(Advanced) and click Next.
7. Select Infrared devices and click Next.
8. Choose Extended Systems as the manufacturer.
9. Choose ESI-9680 JetEye Serial Infrared Device as the Infrared device
and click Next.
10. On the Hardware to Install screen, click Next.
11. From the Serial Port list, select the COM port number to which the
Adapter is attached and click Next.