Echo HCA-261 - Manual (Page 19)

S
HAFT
H
EDGE
C
LIPPER
O
PERATOR
'
S
M
ANUAL
17
EQUIPMENT CHECK
Before operation a complete check of the unit must be performed;
• Check unit for loose/missing nuts, bolts and screws. Tighten and/or
replace as needed.
• Inspect fuel lines, tank and area around carburetor for fuel leaks.
DO NOT operate unit if leaks are found.
• Check that the blade assembly is firmly attached and in safe operating
condition. Dull, loose or damaged blades should not be used.
• Tighten the Blade angle adjustment lever before operating.
• Check that shoulder harness is adjusted for safe, comfortable
operation.
DETERMINE OPERATION AREA
• Review the area to be trimmed. Look for hazards that could contrib-
ute to unsafe conditions. DO NOT operate unit if any wires (power,
telephone, cable, etc.) are closer than 4.5 M (15 ft.) to any part of the
operator or unit.
• Spectators and fellow workers must be warned, and children and
animals prevented from coming nearer than15 M (50 ft.)while the
trimmer is in use.