Important safety instructions – Ericsson STYLUS PRO 4900 User Manual
Page 13
15
Introduction
|
15
Important Safety Instructions
Before using your printer, read the following safety instructions to make sure
you use the equipment safely and effectively.
•
The Epson Stylus Pro 4900 weighs about 115 lb (52 kg) without the ink
or paper. Make sure you have two people lift the printer.
•
When setting up the printer, make sure you have enough space around
it, as shown below. You may need more space behind the printer if you
print on large sheets of heavy stock or posterboard.
•
Place the printer on a flat, stable surface that is larger than this product.
The printer will not operate properly if it is tilted or at an angle.
•
Avoid places subject to rapid changes in temperature and humidity. Also
keep this product away from direct sunlight, strong light, heat sources,
or air conditioners.
•
Avoid places subject to shocks and vibrations.
•
Keep the printer away from dusty areas.
•
Keep your entire computer system away from potential sources of
electromagnetic interference, such as loudspeakers or the base units of
cordless telephones.
•
Place the printer near a wall outlet where the plug can be easily
unplugged.
•
Use only the type of power source indicated on the label.
7 in (182 mm)
23 in (586 mm)
53 in (1349 mm)
21 in (533 mm)
6 in (150 mm)
46 in (1163 mm)
6 in (150 mm)
6 in (150 mm)