Ericsson STYLUS PRO 4900 - Manual (Page 60)

62
62 | Printing With Epson Drivers for Windows
Sizing Images for Borderless Printing on Roll
Paper
For true borderless printing on roll paper, you can select either Auto
Expand or Retain Size or create a custom paper size, as described on
page 69. Your image may be clipped on the left and right edges, but you can
minimize clipping by sizing your image according to the roll paper width
and by adjusting the length by adding 0.1 inch (2.54 mm) to it.
Auto Expand provides a simple solution for borderless printing with
minimal image clipping because you can create an image width almost equal
to the width of the roll media and choose between
Min , Standard , and Max
expansion. If you use Retain Size , you need to size your image slightly wider
than the paper width. See the table below for guidelines:
* Requires use of the borderless printing spacer.
Roll paper width
Image width
(with Auto Expand) Image width
(with Retain Size)
8 inches*
(203 mm) 7.8 inches
(198.11 mm) 8.25 inches
(209.54 mm)
10 inches
(254 mm) 9.8 inches
(248.92 mm) 10.25 inches
(260.35 mm)
11 inches*
(279 mm) 10.8 inches
(274.32 mm) 11.25 inches
(285.75 mm)
13 inches
(330 mm) 12.8 inches
(325.12 mm) 13.25 inches
(336.54 mm)
14 inches
(356 mm) 13.8 inches
(350.52 mm) 14.25 inches
(361.95 mm)
16 inches
(406 mm) 15.8 inches
(401.32 mm) 16.25 inches
(412.75 mm)
16.5 inches*
(419 mm) 16.3 inches
(414.02 mm) 16.75 inches
(425.45 mm)
17 inches
(432 mm) 16.8 inches
(426.71 mm) 17.25 inches
(438.15 mm)