Casio STC-U10 - Manual (Page 11)

10
About This Manual
This manual covers the topics below.
• What you need to know before using the STC-U10 Printer
• How to install the stamp making software that comes with the Printer.
For information about how to use the stamp making software, refer to STC-PC10
Application User’s Guide.
• How to connect with a computer
• How to print a stamp
• How to assemble a stamp
• The contents of this manual are subject to change without notice.
• The contents of this manual have been checked at each step along the production
process. Feel free to contact us if you notice anything that is questionable,
erroneous, etc.
• Any copying of the contents of this User’s Guide, either in part or its entirety, is
forbidden. Except for your own personal use, any other use of the contents of this
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden under
copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or losses
suffered by you or any third party due to the use or malfunction of this product.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or losses
caused by loss of memory contents due to malfunction or repair.
• Screen shots shown in this manual are based on the English version of Windows 7,
and examples assume that “English” was selected as the display language during
installation. Screens produced by other operating systems or when another display
language is selected may be different from the screen shots shown here.