Casio STC-U10 - Manual (Page 25)

24
5.
Connect the USB cable to the Printer’s
USB port.
This will display a USB driver install
wizard on your computer.
Important!
When connecting for the fi rst time, remove the label from the Printer’s USB port.
6. A USB driver is required for proper data communication between your computer and
Printer. Follow the instructions that appear on the screen to install.
• If your computer is running Windows XP Service Pack3 (SP3), a message will appear
during installation. Select “No, not this time” and then click Next > to proceed with
the installation.
• If your computer is running Windows XP, the warning message will appear during
installation. Click Continue Anyway to proceed with the installation.
■ To disconnect from a computer
1. Disconnect the USB cable from your computer.
2. Disconnect the AC adaptor from the power outlet and the Printer.
Important!
• Do not disconnect the AC adaptor or USB cable from the Printer while stamp
printing is in progress. Doing so can lead to malfunction.
• Do not touch the AC adaptor plugs and USB cable plugs while a data
communication operation is in progress. Static electricity and other problems can
cause a break in data communication.