Pressure Systems 98RK-1 - Manual (Page 97)

Pressure Systems, Inc. 98RK-1 & 9816 User’s Manual©
Page 95 www.PressureSystems.com
Example:
● Send TCP/IP commands to 9816 module (via its connected socket) setting the
calibration valve to the CAL (or Re-zero) position:
“w1200” (Insure in RUN/CAL valve mode)
“w0C01” (Set CAL position)
Responses
(both commands):
"A"
"A"
Note
If programmer “knows” that module is already in RUN/CAL valve mode,
the first command above is optional. For more information, see Chapter
4, Figure 4.5.