Epson Long-Focal Length zoom lens ELPLL02 - Manual (Page 16)

14
Rear lens cap
(2) Remove the current lens.
1. Use the enclosed screwdriver to remove the four mounting
screws, and dismount the current lens.
2-2 Mounting the rear-projection wide-angle lens
(1) Mounting the rear-projection wide-angle lens
1. Remove the rear lens cap.
2. Use the enclosed screwdriver to mount the rear projector wide
lens with the four mounting screws. Be sure that the seal read-
ing “UPPER” is on top.
Current lens
Seal
01.2.15, 4:17 PM Page 14