Epson Long-Focal Length zoom lens ELPLL02 - Manual (Page 30)

13
(2) Mounting the front case
1. Set the front case into position and tighten the three screws.
This completes installation.
•
Turn on the power and verify that the projector operates nor-
mally.
Memo •
Be sure to remove the front lens cap be-
fore turning on the power, or it may melt
from the heat.
•
When handling the zoom lens, take care
not to catch your finger between the lens
and the tabletop.
01.2.15, 4:22 PM Page 13