Power tool use and care, Service, Specific safety warnings – Powerplus POWX1723 COMPRESSOR 1100W 12L NO OIL 1,5HP EN User Manual

Page 4: Do’s, Powx1723, 6 specific safety warnings

Advertising
background image

POWX1723

EN

Copyright © 2014 VARO

P a g e

| 4

www.varo.com

 If devices are provided for the connection of dust extraction and collection facilities, ensure

these are connected and properly used. Use of these devices can reduce dust related
hazards.

5.4

Power tool use and care

 Do not force the power tool. Use the correct power tool for your application. The correct

power tool will do the job better and safer at the rate for which it was designed.

 Do not use the power tool if the switch does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

 Disconnect the plug from the power source before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.

 Store idle power tools out of the reach of children and do not allow persons unfamiliar with

the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.

 Maintain power tools. Check for misalignment or sticking of moving parts, breakage of

parts and any other condition t

hat may affect the power tool’s operation. If damaged, have

the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.

 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to stick and are easier to control.

 Use the power tool, accessories and tool bits etc., in accordance with these instructions

and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could lead to a hazardous situation.

5.5

Service

 Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

6 SPECIFIC SAFETY WARNINGS

This symbol indicates warnings to be read before using the product so as
to prevent injury to the user.

Compressed air is a potentially dangerous form of energy; always take
great care when using the compressor and its accessories.

Warning: the compressor may restart when power is restored following a
blackout.

An ACOUSTIC PRESSURE’s value of 2 m. corresponds to the ACOUSTIC POWER’s value
stated on the yellow label located on the compressor, minus 20 dB.

6.1

D

o’s

 The compressor must be used in a suitable environment (well ventilated with an ambient

temperature of between +5°C and +40°C) and never in places with dust, acids, vapors,
explosive or flammable gases.

 Keep the work area free. When operating, the compressor must be placed on a stable

surface.

 Safety goggles should be worn when using the compressor in order to protect the eyes

against any foreign bodies lifted by the jet of air.

 If possible, when using air-powered accessories, wear safety clothing.

Advertising