Adjusting the pressure, Safety valve (fig.2), Cleaning and maintenance – Powerplus POWX1723 COMPRESSOR 1100W 12L NO OIL 1,5HP EN User Manual

Page 6: Maintenance, Technical data, Powx1723, 8 cleaning and maintenance, 9 technical data

Advertising
background image

POWX1723

EN

Copyright © 2014 VARO

P a g e

| 6

www.varo.com

7.3

Adjusting the pressure

 The pressure in the receiver can be checked on the gauge provided (3)
 The compressor is fitted with a pressure adjustment knob (6). With this knob the air

pressure can be regulated so as to optimize use of pneumatic tools.

 The value set can be checked on the gauge (8)
 The set pressure can be taken from the quick lock coupling (4).
 Please check that the air consumption and the maximum working pressure of the

pneumatic tool to be used are compatible with the pressure set on the pressure regulator
and with the amount of air supplied by the compressor.

As soon as the tank pressure is built up, the motor switches off
automatically.

The motor switches automatically on as soon as the tank pressure
becomes too low.

7.4

Safety valve (fig.2)

The safety valve (2) has been set for the highest permitted pressure of the pressure vessel. It
is prohibited to adjust the safety valve or remove its seal
Actuate the safety valve from time to time to ensure that it works when required. Therefore you
need to remove the protection cover.

8 CLEANING AND MAINTENANCE

8.1

Maintenance

Never clean the machine and its components with solvents, flammable or toxic liquids. Us only
a damp cloth making sure you have unplugged the compressor from the current outlet.
After approx. 2 hours of use, the condensate that has formed must be drained from the
receiver. First of all, vent all the air using the accessory connected, as described above. Back
off vent valve (5) (fig.1) located underneath the compressor (switched off beforehand) by two
turns, taking care to maintain the compressor in a vertical position. After draining all the water,
draw up the valve tightly.

Warning: if the water that condenses is not drained, it may corrode the
receiver, reducing its capacity and impairing safety.

As it is a contaminating product, condensate must be DISPOSED of in
accordance with laws on protection of the environment and current
legislation

9 TECHNICAL DATA

Type

POWX1723

Rated voltage

230 V

Rated frequency

50 Hz

Rated Power

1100 W / 1,5 pk

Rotation speed

3400 min

-1

Rated Pressure

10 bar / 145PSI

Tank capacity

12 l

Air debit (capacity)

180 l/min

Weight

13 kg

Advertising