Powerplus POWXQ5320 TILE CUTTER 750W 180MM EN - Manual (Page 9)

POWXQ5320
EN
Copyright © 2011 VARO P a g e | 9 www.varo.com
- free angle cuts
Use the supplied adjustable angle cutting guide. Set the angle as desired. Place and hold the
tile firmly in its position then push the tile forward. Don't push to hard and let the disc do the
job.
9 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug (1).
Inspect tool cords periodically and if damaged have them repaired by an
authorized service facility.
9.1 Cleaning
§ Keep the ventilation slots of the machine clean to prevent overheating of the engine.
§ Regularly clean the machine housing with a soft cloth, preferably after each use.
§ Keep the ventilation slots free from dust and dirt.
§ If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
9.2 Service department
If the connecting cable (or mains plug) is damaged, it must be replaced. Replacement of the
connecting cable should only be carried out by a qualified specialist (qualified electrician).
10 TECHNICAL DATA
Rated voltage AC 230V
Rated Frequency 50Hz
Rated Power 750W S2
Rotation speed 2950Min
-1
Blade size 180 x 22.2 x 2.2 mm
Disc diameter 180mm
Cable length 2M
Max. cutting depth 30mm
Insulation class B
Maximum cutting capacity 90° - 0° 30mm
Maximum cutting capacity 45° - 0° 14mm
Table size 500mm x 380mm
Weigth 17kg
11 NOISE
Sound pressure level LpA 87dB K=3
Sound power level LwA 95dB K=3