Cleaning and maintenance, Troubleshooting – Powerplus POWXQG7510 LAWNMOWER 1800W 460MM EN User Manual

Page 11

Advertising
background image

POWXQG7510

EN

Copyright © 2014 VARO

P a g e

| 11

www.varo.com

12 CLEANING AND MAINTENANCE

Warning: Before performing any Maintenance or cleaning work, Always pull
out the mains plug!

Do not spray the unit with water. Ingress of water may destroy the Switch-plug combination
unit and the electric motor. Clean the unit with a cloth, hand brush, etc.
Expert inspection is required, do not make any adjustment by yourself, must contact to
customer Service centre:
 If the lawn mower strikes an object.
 If the motor stops suddenly
 If the blade is bent (do not align!)
 If the motor shaft is bent (do not align!)
 If a short-circuit occurs when the cable is connected.
 If the gears are damaged.
 If the v-belt is defective.

13 TROUBLESHOOTING

FAULT

REMEDIAL ACTION

Motor does not
run

 Check mains connection cable
 Start on short grass or on an area which has already been mown.
 Clean discharge channel/housing

–the mowing blade must rotate

freely

 Correct the cutting height.

Motor power
drops

 Correct the cutting height.
 Clean discharge channel/housing
 Have mowing blade resharpened /replaced -> customer Service

centre.

Grass catcher is
not filled

 Correct the cutting height
 Allow the lawn to dry
 Have mowing blade resharpened /replaced -> customer Service

centre.

 Clean the grille on the grass catcher
 Clean the discharge channel /housing

Wheel drive does
not function

 Adjust the flexible cable
 Check the V-belt / gears ->customer Service centre.
 Check the drive wheels for damage

Advertising