ERAE Electronics Industry 32 LCD TV none - Manual (Page 20)

Viewing DTV
1. Turn on the LCD TV and press on the remote controller.
2. Use to move to "Component 1/2".
If D-Sub 15 Pin terminal has been connected, select PC.
If DVI terminal has been connected, select "DVI".
If SCART terminal has been connected, select SCART1 or SCART2 .
3. Turn on the DTV receiver and select the channel that you want.
DTV Connections
20
Connection
< LCD TV Back view >
< LCD TV Back view >
1. Connect LCD TV’s Y, P
b
, P
r
terminal in component 1 / 2 to Video receiver’s Video Out terminal using the external cable.
2. Connect LCD TV’s Audio terminals (left & right) in component 1 / 2 to DTV receiver’s Audio Out terminal using
the Audio cable.
DTV receiver’s output terminal can be marked Y, P
b
, P
r
or Y, C
b
, C
r
according to products.
Some of DTV receiver(Set-Top-Box) have an PC Connector (D-Sub 15pin) instead of Component output .
Some of DTV receiver(Set-Top-Box) have an DVI Connector instead of Component output .
Connect Audio Cable from the Audio output terminal of receiver to the PC Audio input terminal of the LCD TV.
Connect the SCART terminal of the LCD TV to the DTV receiver with the SCART cable.
Connecting to the component terminal
Connecting to the D-SUB or DVI terminal
Connecting to the SCART terminal
Connection terminals of other appliances differ by manufacture and model.
(R) (L)
< DTV receiver>
(R) (L)
P r P b Y
< DTV receiver>
< DTV receiver>
Audio Cable
Audio Cable
Component Cable
D-SUB Cable
DVI-D Cable
Audio Cable
SCART Cable
< LCD TV Back view >