ERAE Electronics Industry 32 LCD TV none - Manual (Page 24)

Use to move to .
Press to move to "Plug & Play".
Press to select.
Use to move to the desired "Language".
Press to select.
Press to go back to the previous menu.
Use to move to the desired "country".
Press to select.
24
Using the menu
When the brand new television set it turned on for the first time, following settings can be set using the plug
and play function of the TV.
Press the "Main power" button of LCD TV and then press the "Stand by" button. You will see the country mode
selection menu.
Press .
Basic Use
Automatically "ATM" beginning.
After "ATM" ends, select the desired Language.
Select other of none expressed country.
Initial Settings
Powering the LCD TV
Power on/ off
To turn the LCD TV on :
Press the "Main Power" button of LCD TV and then press the "Standby" button.
To turn the LCD TV off :
Press "Standby" button on the LCD TV and then press the "Main Power" button.
Turning the main power switch off will save energy. It is the same as unplugging the power cord.
If ON Time setting is set, the main power should be ON.
To turn on/off by remote controller :
Press the Power button of remote controller (If the LCD TV is not turned on, check that the "Main Power"
button on the LCD TV main body is turned on. The main power indicator will light up red if turned on).
CAUTION - After turning off the main Power, please wait at least more than 3 seconds to turn the main power back on.