Encore electronic ENUTV-DVB-S - Manual (Page 6)

ENUTV-DVB-S User’s Guide -
6
2.2 - Device Driver Installation
Before You Begin
Make sure that the product is actually installed. (For more information, please refer to
Hardware Installation in the previous section.)
Turn on or restart your computer.
Place the software CD-ROM that comes with the ENUTV-DVB-S in the CD-ROM drive.
Then follow the on-screen installation guide below.
Device driver installation for Windows® XP Home/Professional Edition
1. When the computer has been powered on
for the very first time during the setup, a
message “Found New Hardware Wizard”
dialogue box will appear on the screen.
Click “Cancel” button to close “Found New
Hardware Wizard” window.
2. Insert the ENUTV-DVB-S setup CD-ROM
into the CD-ROM or DVD-ROM drive, the
“Driver & Utilities” setup screen will
appear. Click “Install Driver” button.