Sybase DC35823-01-1500-04 - Manual (Page 133)

CHAPTER 10 Adding Optional Functionality to Adaptive Server
Configuration Guide 117
2 Select Sybsecurity Physical Device Name.
To create a device for an audit table:
1 Enter the full path of the physical device (raw partition) that you located
in “Pre-installation tasks for auditing devices” on page 115.
Enter the physical name of the device to use for the
audit database (default is " "):
/dev/path_to_partition
where path_to_partition is the path to the raw partition for the device.
If you specify an operating system file, the following warning appears:
WARNING: '/secret1/sybase_dr/install/aud1.dat' is a
regular file which is not recommended for a Server
device.
2 Press Return to acknowledge the warning.
auditinit redisplays the Add/Change a New Device for Auditing menu,
which displays the physical name of the device:
ADD/CHANGE A NEW DEVICE FOR AUDITING
1. sybsecurity physical device
name: /secret1/sybase_dr/install/aud1.dat
2. Logical name of the device:
3. Size of the device:
4. Device size for auditing:
3 Proceed through the remaining items on this menu.
Note The Size of the Device value must be equal to or greater than the
Device Size for Auditing value. The Device Size for Auditing must be
equal to the device size. If you are following Sybase auditing guidelines,
you do not need to change the value displayed in Device Size for Auditing.
4 Press Ctrl+A to accept the settings. auditinit returns to the Configure
Auditing menu and displays the device you have created.
CONFIGURE AUDITING
1. Configure auditing: yes
2. Add a device for audit table(s)
3. Add a device for the audit database transaction log
4. Delete a device entry
5. Change a device entry